Beiträge von Tramvaj3

E60 Bendstein S.

I have to be like this if I want to have them get on.

Is there bad position of bus stop cube for minimun E60?

Yesterday I drive with O305G on 131, both routes and it was ok. I forget to look up in logfile, But I just only start omsi, start map, and when it was loaded I had to restart map, I forget to do something in one bus.I look up in logfile and still map.translate, and I only start map and didn't do anything.

And after load menu disappeared, omsi gut stuck on black screen.

I will try it again and see if I can drive whole line with more demanding bus and write if it will be ok or not.

Sunday historic ride on 131

Bus:MB O305G VÖV 1986

Map:Ahlheim V5

Feldmarktstraße, missing navigation, left arrow,.

Zitat

And its not problem with map, but somehow I have from yesterday a problem. For example, a list of spawnspots should appear, but it disappears, when I leave the game window and come back, it appears, the pop-up windows disappear even in the alt menu, but they appear in the same way, then for example, the keyboard shortcuts don't work, and when I leave the game window and come back, the keyboard shortcuts work again. I don't know what's wrong

This was problem with Discord overlay(maybe last update done it), I had to turn it off.

E:I tried 191 from Kirche, I had some problem when I drove a few stops, but I load saved situation(and I off that discord overlay) 1 stop away from missing tile and I drove line to end and I didn't have problem with sky or missing tile. If it will be any problem sometime later I will write here again.

E2:Now I look in logfile and stil map.translate. I had only one problem and it was in Mitte where in a few seconds I had disappeared object but they appeared after a while.

Zitat von alexandermock11

Zitat von dan061234

Zitat von Tramvaj3

Nice

Das gleiche Problem Hab ich manchmal auch obwohl alles installiert und ich fahren kann. Sowohl bei Omsi2 Tool als auch bei Steam Fehlersuche wird nix Gefunden.

Hier müsst die mapordner Ahlheim V5 löschen und dann das update 5.0.2 Installieren, dann geht es auch.

!!!Vor Installation des Fixes, bitte den bestehenden Mapordner (Ahlheim 5), aus dem OMSI 2 Mapordner herauslöschen, da sonst Fehler auftreten können!!!

I done this twice. I don't know why V4 was ok but V5 has this problems.

Nice

Zitat

Das gleiche Problem Hab ich manchmal auch obwohl alles installiert und ich fahren kann. Sowohl bei Omsi2 Tool als auch bei Steam Fehlersuche wird nix Gefunden

Yes, omsi tools says no problem, reinstall didn't work.

Zitat von Staaken79

Zitat von Tramvaj3

I don't know if this could be problem with size of disk. But I have free 184GB on D. And recently I had another disk put in my PC and thanks to that my D where I have Omsi is less full. But I don't think so, because another maps like Lemmental, Stadtr etc. don't have problem with this map translate.

Have you reinstalled the 4GB patch?

I use .bat which will always open 4GB patch and use it immediately

on omsi.exe and than open Omsi.exe

Zitat von KolyanHD

Zitat von Tramvaj3

Zitat von KolyanHD

Tramvaj3 Bei mir funktioniert alles einwandfrei, kein Fehler 191, keinerlei Probleme.

I will try load whole map at start and tried it from load position 2 stops after Mitte and see if I can drive to Kirche without problem.

You need to do this, everything will be deleted from the map, and then reinstalled again, everything will be in order on the map.

I tried that, load situation and I could drive to terminus(except I got stuck game near 3 stop -_-), but I didn't had problem with drive, but I had still that map translate error, but only a several, later in logfile I didn't saw any. I will try late drive this line back and see if it I can drive it whole line :DDD

oh crap now I load situation and in a few seconds I got that problem with random object. Now I just got this building on road.

and yes again map translate errors

oh this is better -_-

I don't know if this could be problem with size of disk. But I have free 184GB on D. And recently I had another disk put in my PC and thanks to that my D where I have Omsi is less full. But I don't think so, because another maps like Lemmental, Stadtr etc. don't have problem with this map translate.

When I go home I will load map without bus spawn bud and try 191 from Kirche

Zitat von KolyanHD

Tramvaj3 Bei mir funktioniert alles einwandfrei, kein Fehler 191, keinerlei Probleme.

I will try load whole map at start and tried it from load position 2 stops after Mitte and see if I can drive to Kirche without problem.

I just open Omsi, load save situation in BTF, use spawnspot to K Mitte, than drive to K Mitte stop, and I drove to next stop, after I drove to 3rd stop I got blue sky. How I can drive only this much without problem? I don't know why this map has for me so much problem and another DE map like Lemmental, Stadtr. not.

And its not problem with map, but somehow I have from yesterday a problem. For example, a list of spawnspots should appear, but it disappears, when I leave the game window and come back, it appears, the pop-up windows disappear even in the alt menu, but they appear in the same way, then for example, the keyboard shortcuts don't work, and when I leave the game window and come back, the keyboard shortcuts work again. I don't know what's wrong with Omsi.

E:In CZ Omsi forum I found same errors in logfile from one person and there was maybe solution to use load whole map at start. But some bigger map could have problem with useing this. I haven't this load tick after in some map was written to not use that load.

Zitat von Tramvaj3

Ok now I don't have problem with that missing part of map but not at all.

358 1:52:00 - - Error: Fehler bei Bereichsprüfung: map.translate

I have many errors of this in logfile

I had that problem only in Budapest and Delpest, which is why I don't want drive this map, even though I would like to. But i can in some time have problem with map when I drive with bus.

I drove line 193 back and after few stop to terminus Listau, somehow map got changeg, like objects was random placed and after I drove some meter from bus stop I got sky. This problem I had with Budapes or Delpest too

I just tried again, but use load situation in Einchenöhe BHF and than spawn to Listau S, than change position of but to that bus stop, where I got that problem and drove to terminus, but I had in logfile same errors, yes that error entry is from last logfile.

Alles anzeigen

Someone know how to fix that Fehler bei Bereichsprüfung: map.translate? I drove now 191 from Woltenausee to NK, and when I drove from Mitte I got later sky.

I thought when I used specific number in max resolution of texture in advanced option and use 25 FPS, it will be ok, it was in Lemmental, but here it isn't ok.

KolyanHD I see you have same error in logfile.

Ok now I don't have problem with that missing part of map but not at all.

358 1:52:00 - - Error: Fehler bei Bereichsprüfung: map.translate

I have many errors of this in logfile

I had that problem only in Budapest and Delpest, which is why I don't want drive this map, even though I would like to. But i can in some time have problem with map when I drive with bus.

I drove line 193 back and after few stop to terminus Listau, somehow map got changeg, like objects was random placed and after I drove some meter from bus stop I got sky. This problem I had with Budapes or Delpest too

I just tried again, but use load situation in Einchenöhe BHF and than spawn to Listau S, than change position of but to that bus stop, where I got that problem and drove to terminus, but I had in logfile same errors, yes that error entry is from last logfile.

Zitat von Tramvaj3

now Erckenfeld S don't work, only sky, logfile didn't help me. I don't know now where can be problem. I will try sporthalle spawnspot which was ok.

Somehow replacing Sceneryobjects and splines works for now. Hopefully it won't be a problem anymore

now Erckenfeld S don't work, only sky, logfile didn't help me. I don't know now where can be problem. I will try sporthalle spawnspot which was ok.

Zitat von vNNa diVEvieN

Zitat von Tramvaj3

Zitat von vNNa diVEvieN

Servus. Ich kann noch immer keinen Eichenhöhe Unlauf fahren. Wie kann man das lösen?

If you don't have any trips in that group, thats problem with ö, I had to change ö to o in aillist and in all ttl where was Eichenhöhe groups. All ttl where was problem with Eichenhöhe I saw in logfile

Yes but to change all ttls is a very planty of work

I know, I had same problem later in V4 and hat to change it too.

Zitat von vNNa diVEvieN

Servus. Ich kann noch immer keinen Eichenhöhe Unlauf fahren. Wie kann man das lösen?

If you don't have any trips in that group, thats problem with ö, I had to change ö to o in aillist and in all ttl where was Eichenhöhe groups. All ttl where was problem with Eichenhöhe I saw in logfile

I know repaint has that blue stickers which isn't on setvar so you can't without visible on it make it disappear, but blue sticker goes on hybrid text and on green sticker and on back is 3D logos but repaint is texture logos too.

and is there any way to get rid of this errors? I have many of these in logfile.

And somehow from Eckwerd S, I had problem with not loading map further. And I think that maybe problem with some splines, which has in .sli texture which isn't exist, that could be problem? In logfile was only this trains problem. And without advanced in Omsitools I don't have any missing things, only with advanced had problem with that some .sli

In last picture I don't know why this bus hate more passengers(in both lines which I drove my bus want go down). I had that problem with Gladbeck Citaro too.

Map:Lemmental-Neuenbreid (V4)

Bus:MB O405 1992(Drei Generationen) with IVU

Does someone know why in 1992(Maybe other MB O405 from Drei Generationen too), if i choose ticket it will say about prohlem with pin and I can’t print ticket? i don’t see any problem.

And i don’t know, How I can have line and terminus without use alt menu.

Map:Lemmental-Neuenbreid (V4)

Line:350

Bus:MB C2 LE E6