- Lizenzbestimmungen
- Creative Commons <by>
- Empfohlene OMSI-Version
- Aktuell v2.3.x
- Vorausgesetzte kommerzielle Erweiterungen
- Keine
This mod adds the mercedes benz logo to the steering wheel in 3D and new texture.
Look the readme!!
This mod adds the mercedes benz logo to the steering wheel in 3D and new texture.
Look the readme!!
thesure
Las instrucciones en español son un poco confusas, por ahora no me funciona el BRT C2.
markos703
Buenas, lo he intentado explicar lo mejor posible, si me facilitas una captura de pantalla del logfile.txt y del model.cfg para ayudarte, te lo agradeceria.
Un saludo!
bennennen
Ich bekomme den Mod nicht installiert, obwohl ich die Anleitung ganz genau befolgt habe ._.
"below this mesh add another one that is like this:"
Kann mir das evtl jemand erklären?, da könnte mein Fehler liegen
Danke
PS: Der Mod sieht halt richtig geil aus
markos703
Hello, how did you put it in the model.cfg?
knightrider1976
Ich hatte das gleiche Problem wie DVB Dresden und habe eine Lösung gefunden, die zumindest bei mir funktioniert (keine Garantie).
Ändert den Abschnitt von "Innenraum\Marcos\logo.o3d" in:
[mesh]
Innenraum\Marcos\logo.o3d
[matl]
cromado.bmp
0
[matl_envmap]
envmap_unscharf.bmp
0.25
[matl_alpha]
2
[mouseevent]
C2_CP_Amartur_verschieben
[visible]
C2_CP_Lenkrad_sichtbar
0
[animparent]
volante
markos703
Thanks a lot!
._.
GUten Abend,
Ich hab das Problem, das sich der Stern nicht mit dem Lenkrad mit dreht und immer an einer Stelle bleibt. Ich hab alles so wie in der Anleitung gemacht. Kann mir jemand helfen?
[mesh]
Innenraum\Fahrerplatz\Lenkrad.o3d
[mesh_ident]
volante
[mouseevent]
C2_CP_Amartur_verschieben
[visible]
C2_CP_Lenkrad_sichtbar
0
[animparent]
Amartur
[newanim]
origin_from_mesh
origin_rot_y
90
anim_rot
Axle_Steering_0_L
604.830412601705
[mesh]
Innenraum\Marcos\logo.o3d
[animparent]
volante
[animparent]
Amartur
[matl]
cromado.bmp
0
[matl_envmap]
envmap_unscharf.bmp
0.25
[matl_alpha]
2
[mouseevent]
C2_CP_Amartur_verschieben
[visible]
C2_CP_Lenkrad_sichtbar
0
Biffer
Thanks for this, Markos. Can you please confirm that the download on here has been updated with the changes Sjain suggested?
Best regards,
Andy.
markos703
it's already uploaded!
Trissi
Der Stern ist nicht mittig.
markos703
Hallo! Könnten Sie mir bitte ein Bild schicken?
Trissi
Da muss ich kein Bild absenden, im Preview-Bild vom Download sitzt er nicht mittig, also downloade ich mir den garnicht erst.
shanie
The model itself is actually centred on the steering wheel perfectly ingame, but the lighting in the preview picture makes it look a little off-centre to the right. When you use it in-game, its actually properly centred
shanie
Nice job, thanks for the model. Its placed very well. Just a few suggestions:
I would recommend adding envmap for a shiny effect, like this mod: 3D Außenlogos für den eCitaro. Currently it feels pretty flat and the texture mapping could be revised too in my opinion, it cuts off a lot on some edges: RdKPiUs.png
I was able to implement envmap by adding this under the [mesh] definition:
The logo then shines in-game.
Additionally, the logo does not move with the adjustable dashboard position, it just stays fixed in place.
This is because you are missing an animparent tag for the dashboard adjust thing. Add the Amartur animparent so that the logo moves with the adjustable dashboard position too:
Also, in the archive, there are a few problems:
- The model path definition is incorrect. In the model cfg, it is defined as
[mesh]
Innenraum\marcos\logo.o3d
But, the actual model file included with this archive is located as Model\Marcos\logo.o3d
Hence it fails to load ingame.
- In the English translation of your instructions in the Readme.txt, you have also translated the model definition, leading to issues where, if a user pasted this translated version, it would not work ingame.
for example:
Interior \ marcos \ logo.o3d -- Spaces added here, model would not load ingame
[Animparent] -- animparent tag capitalised to Animparent
steering wheel -- Animparent mesh indent was translated, so the 3D logo would not move with the dashboard adjust
I would make sure to only translate your instructions, and never the model cfg bits. Just paste the non-translated model cfg definition.
Overall, here is my full model cfg definition proposed. Just be sure to double check the path of the .o3d file matches it!
- Two copies of the mod are present, there is an OMSI 2 folder, then another folder titled "Steering wheel 3D logo - C2 [BRT]", which is another copy of the mod.
markos703
Thank you very much for your advice, I will apply it
shanie
No problem glad I was able to help
shanie
Small update @markos428, I made some silly mistakes. Just edited my comment right now, if you implemented the changes already please take another look. Sorry about that!
Regwiem
This doesn't work for me - make a full replacement file!
markos703
Hello, I have done it this way so as not to have to make a model for each modification that exists such as the k ++ or the steering wheel arrangement, I will change the instructions so that it is better understood
Vorratsdruck
Irgendwie habe ich ein Problem. Wie kann man das beheben ? Alles nach Anleitung gemacht.
20200909224425_1g2k9r.jpg
markos703
Good evening Venix, did you put this directory on the model?
[mesh]
Innenraum\marcos\logo.o3d
if correct make sure frames folder is inside innenraum.
I hope I have helped you, any questions tell me
INVG
Warum wird hier gleich wieder ein trauriger Smiley gegeben? Da macht sich jemand die Mühe, erstellt einen 3d Stern mit EInbauanleitung und stellt diesen der Communnity zur Verfügung und es passt nicht? Und dann schreien wenn mal gar nix mehr kommt. Einfach nur noch ätzend.
Andvari
Macht die Person öfters mal und antwortet dann auf weitere Fragen überhaupt nicht mehr. Feedback mäßig kompletter Murks
markos703
He escrito un mensaje para ver el problema que tiene y si puedo ayudarlo espero que me responda.
Christoph22
Wofür braucht man Berlin X10?
What do you need Berlin X10 for?
markos703
For the bus, is the c2 of the last DLC
Christoph22
The bus is from the DLC "Berlin BRT", not from the "Berlin X10" DLC.
Simon_BKW
Ja du kannst aber beim Hochladen "noch" nicht BRT als Voraussetzung wählen das müssten die Admins oder Moderatoren mal einfügen aber Tatra hat ja wohl gerade Probleme mit den Sachen.
Christoph22
Ja. Dann sollte man es aber besser einfach so in die Beschreibung schreiben. Das Berlin X10 DLC wird hier ja nicht benötigt. Das sorgt bei manchen die sich nicht so gut auskennen für Verwirrung.
markos703
I have already withdrawn it! Thank you very much for your commentI
Andvari
A picture of the Logo would be nice