= Englisch [EN], 
= Deutsch [DE], 
= Französisch [FR]. Wenn du die angegebene Sprache nicht beherrschst, schreibe auf Englisch! Will there be an update where the steering wheel is made height adjustable?
I already answered above :p
Genau das hab ich auch ausprobiert bevor ich Omsi geschlossen hab und der Fehler war immer noch da. Ich konnte den Bus wenn er neu gespawnt war nicht starten. Weder die Elektrik noch den Motor, weil er dauerhaft wieder ausging.
Since it looks there is no way around it, my best advice would be to drive without collisions whilst waiting for an update 
Alles anzeigenAlles anzeigenI need more info to understand that bug, it looks like you are not many people to have it, and no matter what I do I can’t replicate it. Could you answer to the following questions ? It might help me.
1.Do you play with Collision ?
2. If yes does it happen at random or is it predictable (near pavements for example)
3. Does it happen on all versions or just one ?
4. Does it happen on every map ?
5. How many times did you press on « E » to start the bus ?
6. Is it happening with both dashboards ?
7. Did you put some buses from the pack in AI ?
8. If yes, do they have different dashboards ?
9. Do you play with a mod on the bus ?
10. Do you use BBS ?
Thanks in advance, it’s a lot to answer but I’ m afraid I can’t help otherwise
1. Yes
2. It happens random on normal driving.
3. I only tried it on the 319NF E3 and on the 315NF 1+2 E3. But I guess it´s happening on the other versions as well.
4. Since now it happens on every map I tried.
5. 3 times maybe. I don´t rly know I was waiting until the lights are on in the Dashboard and then I started the bus normally.
6. It happens on both Dashboards.
7. No
8. No
9. Only the Setra Logo Mod
10. No
And I found out if you have a crash and the Electric is broken you can´t repair the bus anymore. Everytime when you repair it the Dashboard lights up and 1 Second later it´s off again. And that happens the whole time, you can´t start or stop the bus anymore. The Only thing what helps is despawning the Bus, Close Omsi, Start it again and Spawn the Bus again. Then the Problem is resolved.
I hope with that Info you can fix it.
Ok looks like a bounding box issue, I’m confused because it was fixed I thought ? While waiting for the update I would recommend you play without collision active
No, I can’t do that because it means I have to treat the plastic steering collumn as an articulation joint (it must bend) and that’s a lot of work for not much result 
Alles anzeigenFR
Moi aussi, j'ai trouvée quelques erreurs:
Le 2+2 Euro3 manque la boite en bas de la barre pour la première porte (erreur1.png)
Le 2+2 Euro3 tiene le clignotant droite sur le glass de la deuxième porte (erreur2.png)Logo-Patch: Le volant VDO fait l'effect de manquer quelques matériels du logo "Kässbohrer", ils sont invisible et ça produit un logo noir luisant.
EN
I found some issues:
the 2+2 Euro3 misses the box at the bottom of the first door's pole
the 2+2 Euro3 has its right hand side indicator on top of the glass of the second doorthe logo-texture of the VDO-steering wheel contains invisible elements, resuklting in a gloss black Logo ingame
DE
beim 2+2 Euro3 fehlt die Getriebebox am unteren der Stange des ersten Türflügels
beim 2+2 Euro3 befindet sich der rechte Seitenblinker auf dem Glas der zweiten Türdas Logo des VDO-Lenkrads scheint einige der t2+2 Euro3 Texturen für das Logo durchsichtig zu sein, was zu einem schwarz glänzendem Logo führt.
Oh cool ! That explains why the logo mod doesn’t work, thanks :3
Alles anzeigen
Ich habe mich jetzt auch mal durch das Repaint-Durcheinander gekämpft und folgende Liste an fehlenden "Textur-Changes"-Einträgen in den Modeldateien erarbeitet, die meiner Meinung nach noch fehlen. Einiges davon hat Einsamer_Wolf86 schon genannt.
Bei allen Bus-Varianten:
- retro (für die Außenspiegelabdeckungen)
Beim S315 NF 1-2-1 Euro3:
- dossier (für die Sitzbezüge)
Beim S315 NF 2-2 Euro2 + Euro3 und S319 NF 1-2-1 Euro2 + Euro3:
- clim (für die Klimaanlage)
- colonnes (für die Haltestangen)
Beim S319 NF 1-2-1 Euro2 zusätzlich noch:
- ADAD (für die Haltewunschknöpfe)
Die suboptimale Funktionsweise der Kennzeichen wurde ja auch schon behandelt. Im Moment ist es somit nur leider nicht ohne weitere Model-Anpassungen möglich beim S315 NF 1-2-1 Euro 3 und S319 NF 1-2-1 Euro 3 normal-große Kennzeichen zu nutzen. Wenn ich da falsch liegen sollte, korrigiert micht gerne.
I've also fought my way through the repaint possibilities and worked out the following list of missing "Texture Changes" entries in the model files, which I think are missing. Einsamer_Wolf86 has already mentioned some of them.
At all bus variants:
- retro (for the exterior mirror covers)
At the S315 NF 1-2-1 Euro3:
- dossier (für die seats)
At the S315 NF 2-2 Euro2 + Euro3 and S319 NF 1-2-1 Euro2 + Euro3:
- clim (for the air conditioning)
- colonnes (for the handrails)
At the S319 NF 1-2-1 Euro2 additionally:
- ADAD (for the stop request buttons
The suboptimal functioning of the license plates has already been dealt with. At the moment it unfortunately is not possible to use normal-sized license plates on the S315 NF 1-2-1 Euro 3 and S319 NF 1-2-1 Euro 3 without further model adjustments. If I'm wrong about that, feel free to correct me.
Thanks it will help me a lot ! About the licence plate, please keep in mind that the setvar to change the format is only compatible with the 1+2 €3 for now as it was well precised in the SETVAR manual, so nothing surprising if you can’t change it however, since it appears to be popular feature I’ll introduce it to other variants 
I have started working on the door animation which I’m completely overhauling.
Yes, it looks better than the currently one.
But there is no dynamic too. It looks like an electric door. But this type of door will controled by (compressed) air. If a wing hits the border (when he opening), on your video there are no bouncing or something else... like a magnet.
I remember you, look at the door scripts from LnD or Sobol.
Sadly this is as close I’m gonna get, for some reason the bouncy effect isn’t compatible with the upward movement of the door (I tried on a normal door, bouncy effect works with the same script appart the upward movement)
Alles anzeigenI can't repaint the license plate... I have the setvar correctly and the Autokraft license plate is nevertheless there...
My setvar:
[setvar]
ver_plaques
1
Bus is the 315NF 1+2 Euro 3 (but its also so with other busses).
As it is explained in the setvar manual, this setvar only works on one version. And about the repaint part, depending on the setvar you chose, the plate is not in the same position on the template
The biggest Issue I have atm is that the Electric is dead every 10 Seconds. The Buses are unplayable atm. I tried it on the 319NF E3 and the 315NF E3 and the Problem is on both buses. Is there any chance to fix this?
I need more info to understand that bug, it looks like you are not many people to have it, and no matter what I do I can’t replicate it. Could you answer to the following questions ? It might help me.
Do you play with Collision ?
If yes does it happen at random or is it predictable (near pavements for example)
Does it happen on all versions or just one ?
Does it happen on every map ?
How many times did you press on « E » to start the bus ?
Is it happening with both dashboards ?
Did you put some buses from the pack in AI ?
If yes, do they have different dashboards ?
Do you play with a mod on the bus ?
Do you use BBS ?
Thanks in advance, it’s a lot to answer but I’ m afraid I can’t help otherwise
I mean the target display on the outside
Hi
Is it possible to select a different target display via setvar? If so how does it work?
If you mean the inside display, there is only one
Sadly no. There is only 1 MATRIX per bus, LED Krueger K++ on the €3 2 doors, and dot matrix on the other
Hi everyone !
An update to address all the issues reported is in progress.
I have started working on the door animation which I’m completely overhauling.
Of course all buses are different especially when you consider how old they are, so I did a video with the OMSI animation and a real €3 S315NF side by side :).
Enjoy
Alles anzeigenAlles anzeigenhallo bei mir funktioniert der after Drucker nicht er ist da kann alles machen aber die Schrift und zahlen werden wenn ich sie eingebe nicht da gestellt
Wenn du den MAN NLC oder BRT Addon nicht hast liegt es daran.
Seitens von Halycon wurde ein Fix geladen.
danke hätte der Ersteller auch erwähnen können das wir das brauchen
Un theory you don’t need those other DLC, the correct fonts were included, but I changed the name of the files in order not to have conflicts with other DLC. For some reason it doesn’t work with those files with other names even though it should. As we said, a permanent automatic hot fix should be sent at the start of the week.
Moin wie schalte ich denn die Klimaanlage ein? Der Knopf auf dem bedienteil der Heizung/ Lüftung fehlt.. ein Sound für AC gibt es im Sound Ordner.
There are issues with the AC, it was working at some point but it looks like I changed something that makes it not working anymore late in the BETA test, that’s why we didn’t notice and it was realeased with a faulty AC. We are working on it
Hi !
An update to address all the issues reported is in progress.
I have started working on the door animation which I’m completely overhauling.
Of course all buses are different especially when you consider how old they are, so I did a video with the OMSI animation and a real €3 S315NF side by side :).
Enjoy
Hi
Is it possible to select a different target display via setvar? If so how does it work?
If you mean the inside display, there is only one
Mal eine frage: wie kann man im €3 Setra mit der Türkonfiguration 1-2 diese 7 roten griffe grau machen damit es einheitlich aussieht
EN: How can change the 7 red seat handles from red to gray as in form the other seat handels
It looks like there was an error in export and for some reason, the handles use 2 different textures hence it’s impossible to repaint half of it for now
Excellent model, really impressed except for one annoying thing, the bus gets stuff wehn driven by AI, it cannot open the centre doors to let people get off the bus so just stays stuck at the stop, I hope this is fixed as not having it work on AI is a real pain, I just wanna enjoy it and have it like every other bus, thanks.
I hadn’t noticed that even though I have some in AI, on which variants do you encounter the bug ?
Good evening,
is it possible that the buttons for the roof hatches were forgotten in the Euro2 variants with standard dash? Or am I missing something?
Greetings Tom
No you don’t miss anything it’s possible I forgot them 🥲
Alles anzeigenHello,
I just noticed the error below on a tour in the Ruhr area. The passengers stand in the rear door
Greeting,
Semir123
Are these passenger who wanna get off or just regular standing passengers ? If they want to get off I can’t fix it, otherwise it’ll be an easy fix :3
Alles anzeigenAlles anzeigenAlles anzeigengladly also in english
I noticed it because I created a repaint for the 319NF, had made the appropriate entry in the cti, to me in Omsi itself then wondered why the air conditioning is green (E2) or white (E3). The bars also don't work as I would like them to.
In general the format .png is bad in Omsi, because it causes black textures when you are on the road for a longer time, it would be better to change it to .dds, because Omsi can handle them better. it should also be changed to a 2 high x texture, because otherwise there are hangs and jerks that no one wants to have, makes the whole game then smoother.
since the entries seem to be probably swapped, while in the E2 the entry ver_plaques / 0 gets the large license plate in front, the E3 gets so in front the small, there you have to enter the E3 ver_plaques / 1 that is correct in large. In spoiler is an example.
no plates, I mean the switch on the Kässbohrer dashboard, which activates, or should activate the hazard warning lights (the switch in the 1st row on the far right, with the corresponding pictogram).
I drove the 315 1+2+0 E3 normally, however, since I knew that in the next section a slope waits I activated it in the standstill. When the section was then passed this at another stop switched off again and continued to drive normally, but the vehicle made the impression as if still activated. Do not know how else to describe this
Out of curiosity, is a 319NF 1+2+0 also planned?
I know about performance issue with png, but I use paint.net, and the dds encoder is really bad on that software, quality of dds textures is too low to be acceptable for unsafe texture (hence the quality of exterior texture being bad in some places) that’s why I use png a lot.
About the plates, ver_plaques is only compatible with 1+2 €2.
About the power mode I tried today and got no issues, I’ll have to wait and see if more people have the problem.
About « new versions planned » I don’t know yet tbh
Thanks for the feedback
Alternatively, you can also use .tga. For objects without transparency you can use .bmp. Without transparency would be for example the seats, handrails. With transparency, for example, vehicle paintwork would be because of the windows.
That’s a good idea, I’ll try that if it doesn’t mean I have to export everything all over again 😅
You only 1 type of seats on the 2+2 €3 with 2 different layout
For the 2+2 €2 there are 2 types of seats with 4 layouts
And for the other variants you only have inter urban seats
Alles anzeigenHey, ich hoffe, dass du trotzdem an deinem Projekt noch weiter arbeitest […]
Stapellurch, Perotinus und ich haben uns darüber tatsächlich etwas länger unterhalten. Ergibt es Sinn, an dem Projekt weiterzuarbeiten, wenn nun ein gleiches Fahrzeug existiert. Unter dem Aspekt, dass der Progress hier sehr schleppend voran geht haben wir uns kurz darüber ausgetauscht und sind zu dem Entschluss gekommen, dass das Projekt NICHT eingestellt oder aufgegeben wird.
Gründe dafür gibt es viele. Wir werden das allerdings auch nicht weiter erörtern, da wir natürlich nicht über die Konkurrenz ablästern werden!
Fakt ist: Wir arbeiten weiterhin an dem Produkt.
Bisher haben ja auch kostenpflichtige und kostenlose Lions City Modelle gut nebeneinander koexistiert, warum also nicht auch Setra Modelle.
Indeed it would be best not to enter in the endless debate of concurrence since we have no way to know for sure who started their project first I wish you good luck for yours the SG one looks cool
Alles anzeigenAlles anzeigenAlles anzeigenFür Radkappen muss es dies im cfg.
[setvar]
vis_enjo
1
Für die Spiegelkappen ist die retro.png bzw. retro_3151213.png zuständig.
Allerdings gibt es dafür keinen CTC Befehl, um diese zu repainten zu können.
That’s unfortunate, I need to add the CTC for the rear view mirrors then
also u need to update the Logo mod, it bugs omsi the hell out
The logo mod cannot bug OMSI… it’s just a direct replacement of o3d files that already exist in the bus, your problem must come from elsewhere…
Alles anzeigengladly also in english
I noticed it because I created a repaint for the 319NF, had made the appropriate entry in the cti, to me in Omsi itself then wondered why the air conditioning is green (E2) or white (E3). The bars also don't work as I would like them to.
In general the format .png is bad in Omsi, because it causes black textures when you are on the road for a longer time, it would be better to change it to .dds, because Omsi can handle them better. it should also be changed to a 2 high x texture, because otherwise there are hangs and jerks that no one wants to have, makes the whole game then smoother.
since the entries seem to be probably swapped, while in the E2 the entry ver_plaques / 0 gets the large license plate in front, the E3 gets so in front the small, there you have to enter the E3 ver_plaques / 1 that is correct in large. In spoiler is an example.
no plates, I mean the switch on the Kässbohrer dashboard, which activates, or should activate the hazard warning lights (the switch in the 1st row on the far right, with the corresponding pictogram).
I drove the 315 1+2+0 E3 normally, however, since I knew that in the next section a slope waits I activated it in the standstill. When the section was then passed this at another stop switched off again and continued to drive normally, but the vehicle made the impression as if still activated. Do not know how else to describe this
Out of curiosity, is a 319NF 1+2+0 also planned?
I know about performance issue with png, but I use paint.net, and the dds encoder is really bad on that software, quality of dds textures is too low to be acceptable for unsafe texture (hence the quality of exterior texture being bad in some places) that’s why I use png a lot.
About the plates, ver_plaques is only compatible with 1+2 €2.
About the power mode I tried today and got no issues, I’ll have to wait and see if more people have the problem.
About « new versions planned » I don’t know yet tbh
Thanks for the feedback
Alles anzeigenFür Radkappen muss es dies im cfg.
[setvar]
vis_enjo
1
Für die Spiegelkappen ist die retro.png bzw. retro_3151213.png zuständig.
Allerdings gibt es dafür keinen CTC Befehl, um diese zu repainten zu können.
That’s unfortunate, I need to add the CTC for the rear view mirrors then
Alles anzeigenMaintenant, je me suis aussi un peu penché sur les Kässbohrer. Tout d'abord, merci pour l'addon ! Ensuite, encore quelques retours :
- dans les modèles des deux 319, il manque l'entrée pour la climatisation dans les changements de texture ;
- le fait que le setvar pour la petite plaque d'immatriculation sur les E3 (315 et 319) fait exactement le contraire que sur les E2 (donc l'entrée avec 1 active la petite plaque d'immatriculation à l'avant sur les E2 et la grande à l'avant sur les E3) devrait être mentionné dans le readme ;
- l'interrupteur du bus scolaire (warning) est malheureusement sans fonction ;
- est-il possible que lorsque l'on active le mode "Power", celui-ci ne s'éteigne plus ? Depuis que je l'ai utilisé (et désactivé), le véhicule se comporte en permanence comme s'il était encore activé (testé jusqu'à présent uniquement avec le 315 E3 1+2).
J'espère que le traducteur est assez bon pour que ce soit compréhensible
Deutsch:
Jetzt hab ich mich auch mal ein wenig mit den Kässbohrer beschäftigt. Erstmal Danke für das Addon! Dann noch ein paar Rückmeldungen:
- in den models der beiden 319 fehlt bei den Texturwechseln der Eintrag für die Klimaanlage;
- dass die Setvar für das kleine Kennzeichen bei den E3 (315 und 319) genau das Gegenteil macht wie bei den E2 (also der Eintrag mit 1 schaltet beim E2 das kleine Kennzeichen vorne frei, beim E3 das große vorne) sollte in der Readme erwähnt werden;
- der Schulbusschalter (warnblinker) ist leider ohne Funktion;
- kann es sein, dass wenn man den Powermodus aktiviert dieser nicht mehr aus geht? Seit ich den genutzt hab (und wieder deaktiviert) verhält sich das Fahrzeug dauerhaft so als ob der noch aktiviert wäre (getestet bislang nur mit dem 315 E3 1+2).
Merci d’avoir fait l’effort de traduire en français ça fait plaisir
More seriously let’s continue in English so everyone understands 😂.
It is possible that some parts may not be available to be repainted on the 319 since no repaints was done on them already, this will be fixed.
All the weird things about setvar should be précised in the setvar manual in the addons folder of your game. In case there are errors I’m happy to assist .
Indeed there are no school panels in the DLC. I didnt think it would be a big miss, but I can heat that it would be appreciated.
About the power mode that’s strange. I never had this issue ? Did you use the power mode for a long time, did you continue to accelerate foot flat to the floor after disabling it ? I may need a bit more feedback on that to know what to look for
Thank you for your return
well i gotta say that high temps are this buses WEAKNESS since it doesnt really have a way to "cool" down, i LOVE the tiny turn radius and how fast the bus takes the gas found my official new fav bus to drive
Thank you for your feedback ! We are working on that strange AC problems don’t worry
Alles anzeigen@SADOP The Iveco or the Facelift from Helvete has much version to. I think it will the best opinion.
Another informationen:
I was driving on Landkreis Lahnau on a countryroad with trees. Every 15-20 seconds my electric has a defect and i must repair it.
The Bus was the 315 2-2 E2 and I drive about 70 km/h. Is the boundind box to high or has it a other reason?
As I said, having too much .bus files is performance unfriendly, it’s not beacause other do like that that it is necesseraly better ;). As for the electrics, could you try without collision to see if you still have the problem ? Bounding box might be it but we got issue with it before and it should have been fixed
Nice Bus and good work.
A French and a German Version of every Bus will be perfect. I think is much work, but I think it will be easier than change the printer/ibis per setvar.
I personally find that the E3 Busses has to much power bewtween the gear selection. Normally a Bus has less power if the gear is changing.
It is possible to have both version for each, however keep in mind that OMSI loads all .bus files in the RAM memory, since OMSI can only use 4gb, I’m not sure it would be best to double the number of .bus ?
This was done so the bus is lighter in AI and therefore will stay
Yes. But for screenshots isn't it great.
I understand, that was a difficult choice to made but I figured it would be for the greater good. I can assure you that it makes a huge différent in AI, or if you just use f4 view to browse the map when you are lost.
Alles anzeigen
- Wie aktiviert man denn die Nebelscheinwerfer?
(insbesondere altes Dashboard, Euro II)- Die Nothähne können nicht zurückgesetzt werden und die Türen lassen sich ohnehin noch nicht mal bewegen.
- Die Steckverbindungen einiger Haltestangen sind nur in der Fahrer- und Fahrgastsicht sichtbar. In der freien Kamera (3 und 4) fehlen diese.
- Die Türanimation mag schon seltsam aussehen, liegt aber an dem Greifarm welcher sich unter dem Wagenkasten befindet.
Dieser fehlt aber.
Und generell gehen die Türen immer noch viel zu schnell auf. Auch die Hubverriegelung arbeitet zu schnell. Das ist physikalisch eigentlich nicht möglich. Die Scripte von LnD's Setra's würden da viel besser reinpassen.- Teilweise geht einfach die Elektrik nach einiger Zeit aus.
Man muss den Bus reparieren, dann geht sie wieder an, geht aber nach einigen wenigen Sekunden wieder aus.- Der Retarder funktioniert nicht so richtig.
Man kann den Hebel gefühlt nur alle 3 Sekunden einmal betätigen. Sowohl hoch, als auch runter.- Die Heizung wurde hier nur sehr einfach umgesetzt. Viele Taster sind nicht bedienbar (vgl. LnD Setra).
Auch beim Dashboard sind viele Taster ohne Funktion. Schade eigentlich.
Indeed some details are only visible in inside views. This was done so the bus is lighter in AI and therefore will stay ;). And about dash buttons, there are many features that can’t be put into action in omsi. However, if I just delete all the fake buttons it doesn’t look like the real deal anymore. About the door speed I will need to adjust that :). The electrics bugs are strange to me because I never got such bugs, I need to read more about that to know what to look for. Thank you for your feedback.
Alles anzeigenMoin,
gibt es eine Möglichkeit, dass ich die hinteren Türen ohne Haltestellenbremse öffnen kann? Bei den Bussen die ich kenne war das immer so
Gruß
Nico
Hey,
is there an option to open the back doors without the stopbrake?
Nico
Hi, no there isn’t unfortunately
Hallo, wie kann man die durchlaufende Anzeige stoppen?
Hi, how can i put off that moving display? This feature looking nice, but it need too mouch FPS on my system.
I’m not sure if it will work but you can try to remove all the script from the SIV directory in the bus files, as long as deleting LumiTFT stuff in the main.osc.
Hello,
Wo finde ich den Code für den französischen Drucker? Warum habe ich den deutschen Atron Drucker nicht in der EURO 3 Variante (S 415 2+2) mit BVG Repaint? Kann ich das ändern, wenn ja, wo muss ich es ändern?
Formteil,
Semir123
All of the codes are in the manual on the addons section. For the french thing it’s 229 and 333. I explained it somewhere I don’t remember where but basically there were some complication with putting the ticket machine in setvar. So both €2 and €3 2+2 variants are french spec with no ticket machine and a Navocap system. All others have the AFR4 machine.
