Well, I can say that people get in at the first door even if it isn't fully open yet. You go through the closed door. Then the whining of the ZF is repeated three times and my gray steering wheel went black after a few minutes and only the steering wheel. The newer gray dashboard and the bus itself were not affected, only the steering wheel. Door 2 works fine for me.
[Sammelthread] Add-On Citybus S31X
Als Gast kannst du nur Inhalte in deiner ausgewählten Sprache sehen. Registrierte Nutzer können die Sichtbarkeit anderer Sprachen in ihrem Kontrollzentrum aktivieren, weitere Infos hier.
Alle Themen sind in den Foren mit einer Sprachflagge gekennzeichnet:
= Englisch [EN], 
= Deutsch [DE], 
= Französisch [FR]. Wenn du die angegebene Sprache nicht beherrschst, schreibe auf Englisch! -
-
-
It must be playable by most people and such modifications are not the first to come to mind when you develop content.
And I can’t accept all my work being insulted because some advanced modification was not successfull. I can’t be responsible for that…
The question is if an addon should work somehow or should it have a clean script that works because everything is clean and sorted. Doubled variables don't give the impession that there is all structured in the script folder.
Btw. another thing I noticed, perhaps you can note that for your next projects: It is not recommended to use png files for textures as OMSI turns them black when memory comes to a critical point, way earlier than dds or tga. And second thing about textures: You should alway use sizes of 2^x, as 1024x1024 or 512x4096, as OMSI can only handle these sizes. So if you have 1500x312 OMSI has to recalculate the texture when loading what causes longer time of texture loading and so some freezes.
I had no idea about that, thanks for the tip :3
Well, I can say that people get in at the first door even if it isn't fully open yet. You go through the closed door. Then the whining of the ZF is repeated three times and my gray steering wheel went black after a few minutes and only the steering wheel. The newer gray dashboard and the bus itself were not affected, only the steering wheel. Door 2 works fine for me.
Ooh i understand better now
the animation of the door is done so the first half of the door opens very late, that’s why the go through it early 
-
The question is if an addon should work somehow or should it have a clean script that works because everything is clean and sorted. Doubled variables don't give the impession that there is all structured in the script folder.
Btw. another thing I noticed, perhaps you can note that for your next projects: It is not recommended to use png files for textures as OMSI turns them black when memory comes to a critical point, way earlier than dds or tga. And second thing about textures: You should alway use sizes of 2^x, as 1024x1024 or 512x4096, as OMSI can only handle these sizes. So if you have 1500x312 OMSI has to recalculate the texture when loading what causes longer time of texture loading and so some freezes.
I too have had the problem that it freezes more and more often. Without any error message in the red line. It just sticks. Is there any way to fix this yourself?
Greeting,
Semir123
-
Okay, but we're talking about the single-leaf door in the front. I tested it on the S 315 NF 1+2 and that's when I noticed it. What I also noticed is that the Autokraft with the Doll advertising is actually intended for the Euro 3, since the additional ventilation grilles are not visible at the back.
Wer von euch kann mir bitte einmal den gefallen tun und mal bitte ausprobieren, ob bei dem jenigen, der es einmal testen würde die Kasse mit der Hofdatei Rheinhausen_2021 auch Probleme macht oder ob ihr das schildern könnt, was ihr braucht. Als Beispiel Route 1 ist von Juliansberg nach Herrenholz, er will immer nur von Juliansberg nach Neuweide schildern und automatisch steht denn da Route 3 obwohl ich 1 eingegben habe. Ich hoffe, ihr versteht, was ich meine.
-
Leider funktioniert es bei mir auch mit der änderung nicht...
-
Okay, but we're talking about the single-leaf door in the front. I tested it on the S 315 NF 1+2 and that's when I noticed it. What I also noticed is that the Autokraft with the Doll advertising is actually intended for the Euro 3, since the additional ventilation grilles are not visible at the back.
Wer von euch kann mir bitte einmal den gefallen tun und mal bitte ausprobieren, ob bei dem jenigen, der es einmal testen würde die Kasse mit der Hofdatei Rheinhausen_2021 auch Probleme macht oder ob ihr das schildern könnt, was ihr braucht. Als Beispiel Route 1 ist von Juliansberg nach Herrenholz, er will immer nur von Juliansberg nach Neuweide schildern und automatisch steht denn da Route 3 obwohl ich 1 eingegben habe. Ich hoffe, ihr versteht, was ich meine.
Ok I’ll take a look. However the autokraft is an €2 for sure
I have picture to confirm that -
The things I noticed earlier are shown in pictures.
Yes, Autokraft also had a €2 fine, but the repaint would be more like €3.
-
Hello,
so with me the doors suddenly no longer open (just tested on the Setra 315 NF Euro 2 and 3). I don't know what that is again?
Greeting,
Semir123
-
Okay, hast du die Haltestellenbremse eingelegt oder geht jetzt auch nicht mehr die erste Tür auf?
-
Hallo,
Ich habe auch das gleiche Problem, dass ich seit dem Update des Busses auf v1.1. die 2./3. Tür.Ich kann den Knopf drücken, aber die Türen gehen nicht mehr auf.
Im Logfile steht kein Fehler
Hello,
I changed that from (see here: Post 112). Neither the rear nor the front door will be opened. You only hear the sounds. I put it back to the original file. However, all of a sudden the doors won't open anymore.
Greeting,
Semir123
-
The things I noticed earlier are shown in pictures.
Yes, Autokraft also had a €2 fine, but the repaint would be more like €3.
I stand by it, this exact bus was €2, I have the pictures from when it was in sales, not all €2 had 2 grills at the back
Alles anzeigenHello,
so with me the doors suddenly no longer open (just tested on the Setra 315 NF Euro 2 and 3). I don't know what that is again?
Greeting,
Semir123
I suggest you reinstall the addon because this is simply just not possible
if it still doesn’t work I will try to send you some scripts by PM sort this out. -
I suggest you reinstall the addon because this is simply just not possible
if it still doesn’t work I will try to send you some scripts by PM sort this out.Hello,
I reinstalled the addon. Hopefully it's working properly again now. So the reinstallation helped.
Can you somehow change that for yourself personally, that the doors just open a little faster. They rise very slowly.Greeting,
Semir123
-
Alles anzeigen
Hallo mir ist gerade folgendes Problem aufgefallen seit dem Update passiert es das die 2. Tür nicht schließt nur das schließ geräusch mach
I’m not sure to fully understand, can you be more specific ? Which bus, which exact half door ? Does it not open or does it not close ?
Hello,
i have the same problem too, that since i update the bus to v1.1., i can't open the 2./3. door.
I can press the button, but the doors doesn't open anymore.
In the logfile there is no error
Same as above, I would need more info
Alles anzeigenIch muss hier jetzt mal etwas Dampf ablassen und möchte damit potentiell auch eine Überarbeitung der Skripts und deren Strukturen anstoßen.
Ich versuch mittlerweile seit 3h meinen Atron Compact einzubauen und habe es bislang immernoch nicht geschafft. Normalerweiße schaffe ich das in weniger als 1h.
Die Skripte sind die pure Katastrophe, insbesondere deren Strukturierung. In der Standartvariante existieren 4 verschiedene Skripts für Drucker und Matrix... 4
Hinzu kommt, dass viele Variablen bunt verstreut und zum Teil auch doppelt in irgendwelchen Dateien liegen. Dies kann in Omsi zu unerwünschten Seiteneffkten führen, da doppelte Variablen zum Teil unterschiedlich beschrieben werden (Stichwort Morphis Tankfüllstand, was ja dann nach meinem Hinweis gefixt wurde)
Dann existiert noch sowas hier:
Wieso liegt denn die Main.osc in dem Unterordner für die Drucker???
Dann noch hier recycelt und nicht umbenannte Skripts
Ich hab ja in meiner Zeit in Omsi echt schon viel gesehen und erlebt, aber Skripttechnisch ist dieser Bus vermutlich einer der größten Müllhaufen/Pfuschwerke die ich je gesehen habe.
Ich würde hier dringend auf eine Überarbeitung anraten, zumal vermutlich damit auch noch der ein oder andere Fehler mit behoben werden kann.
MfG
If it wasn’t necessary I wouldn’t have done it like that !!!!
The version with and without the AFR 4 use different script hence, and if you are the so called expert you think you are you should know that if you use different scripts you must write it in the main.osc, hence there are 2 main file.
I do not like your arrogance and I suggest you would use another tone for further questions.
As far as I know it works, isn’t it ?
If you want to change the ticket machine, so be it, but the DLC was not done for users to change thes things, therefore I have no obligation to make it intuitive. The only concerns is that it is playable by everyone.
Please keep your inappropriate remarks for yourself next time
Hello Sadop, since the update it has been the case that the 1st door is closed and the entrance lighting sometimes stays on, because the passengers climb in through the closed 1st door. At the 2nd door it is sometimes the case that only one door leaf closes or both door leaves remain open and you only hear the door closing sound. Bus where I noticed that was the S315 NF € 3 in the door variant 1 + 2
-
The things I noticed earlier are shown in pictures.
Yes, Autokraft also had a €2 fine, but the repaint would be more like €3.
I stand by it, this exact bus was €2, I have the pictures from when it was in sales, not all €2 had 2 grills at the back
Oh okay, because I didn't say anything. Does the 2+2 variant actually get another ticket printer or why hasn't this variant installed one? When you first got started, you understood what I meant, didn't you?
-
Hallo ich nochmal,
Die Performance hat sich verbessert.
Allerdings habe ich jetzt ein Ruckeln bei Öffnen und Schließen der Türen. Als würde die Türanimation besonders viel Leistung fressen. Vorher wurde Omsi komplett neu in einen leeren Ordner installiert. -
-
The things I noticed earlier are shown in pictures.
Yes, Autokraft also had a €2 fine, but the repaint would be more like €3.
I stand by it, this exact bus was €2, I have the pictures from when it was in sales, not all €2 had 2 grills at the back
Oh okay, because I didn't say anything. Does the 2+2 variant actually get another ticket printer or why hasn't this variant installed one? When you first got started, you understood what I meant, didn't you?
No, 2+2 will not have a ticket printer because I don’t have anything that fits the bus. I can put tickets if it’s a feature many would like to see coming
I’m not sure I understand what your mean in the last part of your message ?
Hallo ich nochmal,
Die Performance hat sich verbessert. Allerdings habe ich jetzt ein Ruckeln bei Öffnen und Schließen der Türen. Als würde die Türanimation besonders viel Leistung fressen. Vorher wurde Omsi komplett neu in einen leeren Ordner installiert.
Hi. I’m glad performance has improved
. I changed the door animation to be laggy as they are in real life, I posted a video to compare the real door with the omsi one. Maybe what you consider to be lags simply is the door animation don’t hesitate to come back to me if it’s not that, I can always give you the old scripts backDa stimme ich dir zu, dass habe ich auch gestern bemerkt und dann hatte ich das Lenkrad wieder einblenden lassen und die Textur wurde schwarz, aber nur das Lenkrad.
Maybe try to convert the steering wheel texture to the dds format and remove the png texture from the folder. It will work and should improve performance. However I would recommend to keep the png texture somewhere in case it’s not working
-
Maybe try to convert the steering wheel texture to the dds format and remove the png texture from the folder. It will work and should improve performance. However I would recommend to keep the png texture somewhere in case it’s not working
There is no need to delete the png. If there is a dds with the same file name in the texture folder OMSI automatically chooses that dds and ignores the png, tga, bmp or whatever. Just save the png as dds in the same folder an it should work.
-
I stand by it, this exact bus was €2, I have the pictures from when it was in sales, not all €2 had 2 grills at the back
Oh okay, because I didn't say anything. Does the 2+2 variant actually get another ticket printer or why hasn't this variant installed one? When you first got started, you understood what I meant, didn't you?
No, 2+2 will not have a ticket printer because I don’t have anything that fits the bus. I can put tickets if it’s a feature many would like to see coming
I’m not sure I understand what your mean in the last part of your message ?
I meant that I was wrong, because in fact there were some €2 that didn't have additional fans.
-
Oh okay, because I didn't say anything. Does the 2+2 variant actually get another ticket printer or why hasn't this variant installed one? When you first got started, you understood what I meant, didn't you?
No, 2+2 will not have a ticket printer because I don’t have anything that fits the bus. I can put tickets if it’s a feature many would like to see coming
I’m not sure I understand what your mean in the last part of your message ?
I meant that I was wrong, because in fact there were some €2 that didn't have additional fans.
Aaaah now I understand
my best way of differentiating €2 and €3 is the width of the rear windows, on the €3 the blacked out part on the back are wider and the clear part narrower. Otherwise from the outside it’s hard to tell because early €3 had the black front with old logo and the old style of grill at the back
