= Englisch [EN], 
= Deutsch [DE], 
= Französisch [FR]. Wenn du die angegebene Sprache nicht beherrschst, schreibe auf Englisch! Bin mit Bus null vertraut gewesen ! Aber Danke!
Aber es ist gewohlt oder ?
Das ist das Problem, dass dieses Fahrzeug keine automatische Haltestellenbremse hat. Bspw. beim S31XUL von LnD gibt es das gleiche Problem wenn du anfährst, die Tür nicht richtig zu ist und die Scriptüberschreitung kommt, dann haste den Salat das die Tür "nicht zu ist"
Bin mit Bus null vertraut gewesen ! Aber Danke!
Aber es ist gewohlt oder ?
Das ist das Problem, dass dieses Fahrzeug keine automatische Haltestellenbremse hat. Bspw. beim S31XUL von LnD gibt es das gleiche Problem wenn du anfährst, die Tür nicht richtig zu ist und die Scriptüberschreitung kommt, dann haste den Salat das die Tür "nicht zu ist"
Das ist wahrscheinlich nicht zuendern oder ?
Das ist das Problem, dass dieses Fahrzeug keine automatische Haltestellenbremse hat. Bspw. beim S31XUL von LnD gibt es das gleiche Problem
Das hat nichts mit der fehlenden HST-Bremse zu tun. Ebenso wenig taucht dieser Fehler bei den LnD-Bussen auf. Ich bin die früher immer gerne gefahren und hatte nie Probleme damit. Die Türen öffneten und schlossen problemlos.
MB C2 - Das lässt sich schon ändern. Nur weiß ich nicht, wie der Entwickler das Türscript geschrieben hat. Es gibt im Normalfall eine Variable die alles steuert. Diese wird durch einen Trigger (der Türknopf z.B.) immer zwischen 0 und 1 hin und her gestellt. Und diesen Wert/diese Werte verfeinert man dann mit constfiles, damit eine schöne, smoothe Kurve entsteht. Und mit dem nun resultierenden Wert kann man dann die Türposition darstellen, den Außensound definieren (wie laut), wann die Fahrgäste den Durchgang als offen oder geschlossen erkennen, ...
Das ist das Problem, dass dieses Fahrzeug keine automatische Haltestellenbremse hat. Bspw. beim S31XUL von LnD gibt es das gleiche Problem
Das hat nichts mit der fehlenden HST-Bremse zu tun. Ebenso wenig taucht dieser Fehler bei den LnD-Bussen auf. Ich bin die früher immer gerne gefahren und hatte nie Probleme damit. Die Türen öffneten und schlossen problemlos.
MB C2 - Das lässt sich schon ändern. Nur weiß ich nicht, wie der Entwickler das Türscript geschrieben hat. Es gibt im Normalfall eine Variable die alles steuert. Diese wird durch einen Trigger (der Türknopf z.B.) immer zwischen 0 und 1 hin und her gestellt. Und diesen Wert/diese Werte verfeinert man dann mit constfiles, damit eine schöne, smoothe Kurve entsteht. Und mit dem nun resultierenden Wert kann man dann die Türposition darstellen, den Außensound definieren (wie laut), wann die Fahrgäste den Durchgang als offen oder geschlossen erkennen, ...
Ah ok
Es macht mich halt irre wenn ich diesen Bus fahre,
das man dann manchmal an der HST steht und die Tür gefühlt 3-5 mal auf und zu mach bis es endlich funktioniert das nervt halt ein bissl . Und ich bin in diesem ganzen Thema was Scripte angeht etc.. nicht drinne davon habe ich keine Ahnung !
I'm confused.
Firstly, Iam not I understood everything you all said beacause as I complained before, I don't understand german, and translating everything is a lot of unnecessary extra work for me...
Secondly, MB C2 contacted me in PM and then closed the conversation, so I can't answer, do I have to consider the problem to be solved ?
Thirdly, having spent a looot of time driving these buses prior to their release, and after that I have never encounterd this issue.
I need more info to do anything about it. I understant the symptoms are : the door is closed but the game thinks it isn't ?
Which version did you encountered this issue with (precise version please, for example S315NF EURO2 2+2) ?
Which dashboard had the bus you encountered issues with (VDO or SETRA) ?
Have you installed some mods/altered any scripts of the bus ?
Are you running the last version of the bus, if so have you encountered other issues that could make me thing the update didn't go through completely ?
When did you buy the DLC exactly I.E. Have you bought it before any updates, or did you wait after version 1.2 to buy it ?
Have you always had this issue or is it a recent problem ?
Do you play with other performance unfriendly DLCs such as BBS ?
Having never encounterd such strange bug myself I need to know more to troubleshout a potential issue or simply pinpoint what you may do wrong, that could explain you are the first person to report this bug. Maybe it does Happen on a variant I don't drive often, in that case I need to know which one to test it.
hello SADOP a little question, at
Autokraft there were also the electric doors. Will they still come? Dimensions, sounds and images I can provide
If you can provide good quality pictures and sound, I can work on it yes, but that will not be tomorrow, right now I have other priorities that means I don't work on OMSI 
hello SADOP a little question, at
If you can provide good quality pictures and sound, I can work on it yes, but that will not be tomorrow, right now I have other priorities that means I don't work on OMSI
All right, I send everything I have in terms of information by direct message
Alles anzeigenI'm confused.
Firstly, Iam not I understood everything you all said beacause as I complained before, I don't understand german, and translating everything is a lot of unnecessary extra work for me...
Secondly, MB C2 contacted me in PM and then closed the conversation, so I can't answer, do I have to consider the problem to be solved ?
Thirdly, having spent a looot of time driving these buses prior to their release, and after that I have never encounterd this issue.
I need more info to do anything about it. I understant the symptoms are : the door is closed but the game thinks it isn't ?
Which version did you encountered this issue with (precise version please, for example S315NF EURO2 2+2) ?
Which dashboard had the bus you encountered issues with (VDO or SETRA) ?
Have you installed some mods/altered any scripts of the bus ?
Are you running the last version of the bus, if so have you encountered other issues that could make me thing the update didn't go through completely ?
When did you buy the DLC exactly I.E. Have you bought it before any updates, or did you wait after version 1.2 to buy it ?
Have you always had this issue or is it a recent problem ?
Do you play with other performance unfriendly DLCs such as BBS ?
Having never encounterd such strange bug myself I need to know more to troubleshout a potential issue or simply pinpoint what you may do wrong, that could explain you are the first person to report this bug. Maybe it does Happen on a variant I don't drive often, in that case I need to know which one to test it.
I closed this conversation because I may have found the problem and I'm already getting help! But thank you for the feedback and I can fully understand that you are confused for that I have to apologise to you was not my intention! Oh, and it was the 315 Euro 3 1+2+1 variant
I closed this conversation because I may have found the problem and I'm already getting help! But thank you for the feedback and I can fully understand that you are confused for that I have to apologise to you was not my intention! Oh, and it was the 315 Euro 3 1+2+1 variant
That's usefull information : I rarely drove the 1+2+1. If you find anything, feel free to post about it here, I'll conduct come tests on my side.
That's usefull information : I rarely drove the 1+2+1. If you find anything, feel free to post about it here, I'll conduct come tests on my side.
Ok, it's done. But what I can think of right now, I also have the problem with the 319 1+2+1 and it's just getting annoying and I don't know why but I'll uninstall and reinstall the addon! Maybe that will help!?
Thank you, I think you mentioned the error, watch out, I installed a mod that removes the stops brake that the doors without opening, I think that's the error!
I closed this conversation because I may have found the problem and I'm already getting help! But thank you for the feedback and I can fully understand that you are confused for that I have to apologise to you was not my intention! Oh, and it was the 315 Euro 3 1+2+1 variant
That's usefull information : I rarely drove the 1+2+1. If you find anything, feel free to post about it here, I'll conduct come tests on my side.
Ok, it's done. But what I can think of right now, I also have the problem with the 319 1+2+1 and it's just getting annoying and I don't know why but I'll uninstall and reinstall the addon! Maybe that will help!?
Thank you, I think you mentioned the error, watch out, I installed a mod that removes the stops brake that the doors without opening, I think that's the error!
Maybe that will, but it looks like you only have this issue on 3 doors buses, that's already usefull information. Does this happen only on the front door ?
No. It happens at all three doors!
I have now driven the 2 door with the double door front and rear exactly the same problem!
No. It happens at all three doors!
I have now driven the 2 door with the double door front and rear exactly the same problem!
Well, that leads me to think the problem comes from you then, I've spent a lot of time driving the 2+2 variants and I've never had doors getting stuck after 4 stops, even after 20 stops.
Did you try to re-install the DLC ?
Can you answer precisely the following questions ?
Which dashboard had the bus you encountered issues with (VDO or SETRA) ?
Have you installed some mods/altered any scripts of the bus ?
Are you running the last version of the bus, if so have you encountered other issues that could make me thing the update didn't go through completely ?
When did you buy the DLC exactly I.E. Have you bought it before any updates, or did you wait after version 1.2 to buy it ?
Have you always had this issue or is it a recent problem ?
Do you play with other performance unfriendly DLCs such as BBS ?
Alles anzeigenNo. It happens at all three doors!
I have now driven the 2 door with the double door front and rear exactly the same problem!
Well, that leads me to think the problem comes from you then, I've spent a lot of time driving the 2+2 variants and I've never had doors getting stuck after 4 stops, even after 20 stops.
Did you try to re-install the DLC ?
Can you answer precisely the following questions ?
Which dashboard had the bus you encountered issues with (VDO or SETRA) ?
Have you installed some mods/altered any scripts of the bus ?
Are you running the last version of the bus, if so have you encountered other issues that could make me thing the update didn't go through completely ?
When did you buy the DLC exactly I.E. Have you bought it before any updates, or did you wait after version 1.2 to buy it ?
Have you always had this issue or is it a recent problem ?
Do you play with other performance unfriendly DLCs such as BBS ?
I drove the bus with the setra dashboard! And yes, I have mods installed! And I should have the latest version of the bus! If not, where would I get the update from? Yes, I always have the problem and I don't play with BBS or anything
If you bought the DLC on steam, or activated your key on steam, I suggest you uninstall the DLC and re-install it.
Which mod do you have installed on the setra ?
You confirm you have always had the problem ever since you got the DLC ?
Could you send me a logfile next time you play the DLc and encounter the issue ?
If you bought the DLC on steam, or activated your key on steam, I suggest you uninstall the DLC and re-install it.
Which mod do you have installed on the setra ?
You confirm you have always had the problem ever since you got the DLC ?
Could you send me a logfile next time you play the DLc and encounter the issue ?
Watch out, this is such a general mod so sound, texture, model etc... and there were also new bus files so I had to delete the old ones and I have already reinstalled it maybe I should omit the mod ... The log file doesn't say but I can still send it to you! I'll send you a private message
So I have now reinstalled everything! Only one sound mod is installed! Now everything should work again, I'll let you know if the problem is gone now!
If the mod you have installed replaces the original bus files and more, I cannot be responsible for any issues you encounter. That's why I was asking if you had mod. A simple repaint doesnt change anything, but if you start touching scripts, bus files, or more, it's obvious I can't help you since i only have the stock DLC
If it still doesn't work when you try the DLC only in its original form, without any mod, I'll try to help you. On the other hand, if it becomes clear that the issues comes from the mod you installed, support will stop here : it's already hard enough to give support for my unmodified bus
These errors also occur without mods I drove the s315 1+2+1 with the setra dashboard and the error occurred at door 2
Well send me your logfile then
